NEC DTL-12BT-1 - DT330 - Plus BCH, Description

Page: 99 / 184

UNIVERGE SV8100 Issue 5.0
General Description Manual 2 - 57
For example, an extension user could select the message GONE FOR THE DAY.
Any display multiline terminal user calling the extension may hear a DND signal and
then see the message. See table below for a list of the standard messages.
An extension user can add digits for date, time or telephone number after messages
1~8 and 10 (up to 24 characters). For example, an extension user could select the
message ON VACATION UNTIL and then enter the date. Callers see the original
message followed by the appended date. They could then tell when the user was
coming back from vacation. The system allows all telephones to use the Selectable
Display Messaging feature at the same time.
All telephones can use Selectable Display Messaging at one time.
The default messages are:
Selectable Ring Tones
An extension user can change the way trunks or internal calls ring their telephone.
Selectable Ring Tones allow an extension user to set up unique ringing for their calls.
This is important in a crowded work area where several telephones are close
together. Because their telephone has a characteristic ring, the user always can tell
when their telephone is ringing.
Table 2-1 Selectable Display Messaging Defaults
No. Message Change “#” to...
1
2
3
4
5
6
7
8
9
10
11~20
IN MEETING UNTIL ##:##
MEETING ROOM - ########
COME BACK ##:##
PLEASE CALL ###########
BUSY CALL AFTER ##:##
OUT FOR LUNCH BACK ##:##
BUSINESS TRIP BACK ##/##
BUSINESS TRIP ##########
GONE FOR THE DAY
ON VACATION UNTIL ##/##
MESSAGE 11~20
Time (when meeting done)
Room Name or extension
Time (when returning)
11 digits (telephone number)
Time (when returning)
Time (when returning)
Date (when returning)
10 digits (where reached)
Date (when returning)