NEC DTL-12BT-1 - DT330 - Plus BCH, Description

Page: 155 / 184

UNIVERGE SV8100 Issue 5.0
General Description Manual 5 - 5
1.2 System Blade Capacities
Table 5-3 SV8100 Maximum 9.5” Gateway and 19” System Capacities –
Blades on page 5-6
and Table 5-4 SV8100 Maximum 9.5” Base and
Expansion System Capacities – Blades on page 5-8 show the maximum
number for each blade that can be installed in a system.
This is determined by the maximum blade configuration allowed. When
installing single line sets, DISA, or tie lines, CPU circuits must be allocated for
DTMF receivers. To install single line sets with CO/PBX line access, or when
installing immediate-start tie lines, CPU circuits must be allocated for dial tone
detection.
Table 5-2 9.5” Base and Expansion Maximum System Capacities – Chassis
Hardware 9.5” Base
9.5” Base
+
Expansion
with CPU
9.5” Base
+
Expansion
without
CPU
9.5” Base
+
Expansion
x4
Networked
Chassis
Comments
Number of Slot(s) for
Interface Package
3 Slots 5 Slots 6 Slots 23 Slots
Expansion:
PZ-BS10
3-port Expansion Board for
Controlling Chassis 0 1 0 1 – –
PZ-BS11
1-port Expansion Board for
Expansion Chassis 0 0 1 3 – –
Battery:
CHS LARGE BATT BOX
(External Battery Box) 1 1 1 4 16 x (1+3) –
CHSGW SMALL BATT
BOX
(Small Battery Box) 1 1 1 4 16 x (1+3) –
Power Supply:
MPS7101 1 1 1 4 – 1 is factory
installed with each
chassis