NEC DTL-12BT-1 - DT330 - Plus BCH, Description

Page: 129 / 184

UNIVERGE SV8100 Issue 5.0
General Description Manual 2 - 87
Warning Tone for Long Conversation
The system can broadcast warning tones to a trunk caller warning the user that he
has been on the call too long. If he chooses, the caller can disregard the tones and
continue talking. The outside caller does not hear the warning tones. Warning tones
do not occur for Intercom calls and most incoming trunk calls. DISA trunks can also
have warning tones. Warning tones are not available to analog single line telephone
(SLT) users.
There are two warning tones: Alarm Tone 1 and Alarm Tone 2. Alarm Tone 1 is the
first set of tones that occur after the user initially places a trunk call. Alarm Tone 2
broadcasts periodically after Alarm Tone 1 as a continued reminder. Each alarm tone
consists of three short beeps.
If programmed, DISA is disconnected unless the continue code is entered by the
user. With the Long Conversation Cutoff feature, incoming or outgoing central office
calls can also be disconnected.
Warning Tone for DISA Callers
For DISA callers, with this feature enabled, the warning tone time begins when an
incoming DISA call places an outgoing call and either the inter-digit time expires or
the outgoing call is answered.
If an outside call is transferred to forwarded off-premise using an outside trunk, the
warning tone timer begins immediately. This occurs only if either trunk involved in the
call is programmed for this feature (Program 14-01-17). To transfer a trunk call
off-premise, Program 14-01-13 must be set to 1.
Wireless DECT (SIP)
The Wireless DECT (SIP) (Digital Enhanced Cordless Telecommunication) system
allows using DECT 6.0 DECT (SIP) handsets. These handsets provide the freedom
and convenience of a wireless telephone but also allow access to features provided
by the UNIVERGE SV8100 system.
The number of Wireless DECT (SIP) handsets supported by the UNIVERGE SV8100
is dependant on the number of SIP Client licenses.
Components of the Wireless DECT (SIP) system include the following:
NEC C124 SIP DECT Handset
The handset has the following features:

Alphanumeric Display with Backlight

LED Indication for Incoming Calls

Telephone Book with 40 entries
While idle, dial the number to be stored, then press > and OK. Enter the name
associated with the number using the dial pad, and press OK.