NEC DTL-12BT-1 - DT330 - Plus BCH, Description

Page: 180 / 184

Issue 5.0 UNIVERGE SV8100
5 - 30 Hardware Specifications
S
ECTION
8
SV8100 M
IGRATION
8.1 Description
The MGN-U10 ETU is supported only in the B64-U10, U20, and U30 KSU’s.
The MGN-U10 ETU is available only with the SV8100 system.
The MGN-U10 ETU provides a connection between the IPK/IPK II and the
UNIVERGE SV8100 system. The MGN-U10 ETU is installed in the CPU/Ext
slot of the IPK/IPK II KSU.
IPK/IPKII Migration is supported only with the CHS2U-US (6-slot) chassis.
The CHS2U GW-US (3-slot) chassis is not supported.
A single SV8100 chassis is supported in an IPK/IPK II Migration system.
8.2 Conditions

The IPK/IPKII systems are limited to 18 total card slots.

An IPK system can support the migration card, provided the cards and
terminals are listed below as being supported. It may be necessary to
upgrade firmware as noted.

MEGACO is not supported.
S
ECTION
9
A
UDIBLE AND
V
ISUAL
I
NDICATION
9.1 Tone Patterns
Table 5-20 Tone Patterns lists the frequency and the pattern for the tones.
Tones are used to inform UNIVERGE SV8100 station users of system
functions such as dial tone, busy tone, or ringback tone.
9.2 Multiline Terminal LED Flash Patterns
The UNIVERGE SV8100 system has 2-color LEDs. Green is used primarily
for I-Use conditions and for outside calls. Red is used primarily for Other Use
conditions and internal calls. Refer to
Table 5-21 Multiline Terminal LED Flash
Pattern .