NEC DTL-12BT-1 - DT330 - Plus BCH, Description

Page: 172 / 184

Issue 5.0 UNIVERGE SV8100
5 - 22 Hardware Specifications
S
ECTION
5
P
OWER
R
EQUIREMENTS
A dedicated 100VAC/
120VAC/220VAC/230 – 240VAC
50Hz/60Hz circuit located within
seven feet of the chassis is required. A separate dedicated outlet for each chassis
should be installed.
5.1 Power Supply Specifications
AC Power Supply:

Dedicated 15 Amp circuit

Power Requirements: 120 VAC @ 15A Controlling/Base Chassis

Power Consumption: Base Chassis=263VA,
Expansion Chassis=263VA, total 1052VA

Input Voltage: 90VAC to 264VAC
(Rated Voltage: 100VAC/120VAC/220VAC - 240VAC)

Frequency: 47Hz – 63Hz (Rated frequency: 50/60Hz)

Phase and Wire: Single Phase, 2 Line + PE Type

Grounding Requirements: No. 14 AWG copper wire

Feeding Voltage: D
term
/OPX/DID: -48V
SLT: 25mA / -28V
With input voltage of 120 VAC and with full load conditions:

Output Power: Base chassis=130W, Expansion chassis=130W, total 520W

AC Input I: Base chassis=2.19A, Expansion chassis=2.19A, total 8.76A

VA @ 120V: Base chassis=263VA, Expansion chassis=263VA,
total 1052VA
Table 5-18 Cabling Requirements
Connected Equipment Cable
Music on Hold and Background Music Sources Hi-Fi Shielded Audio Cable
External Amplifier Hi-Fi Shielded Audio Cable
ITL Cabling
Cat 5 Straight Data Network
Cable – 328.1 ft (100m)
maximum distance.
Double Pole/Neutral Fusing (power supply fuses are located at
both the L and N side).