![NDD EasyOne Operator'S Manual Download Page 67](http://html.mh-extra.com/html/ndd/easyone/easyone_operators-manual_714992067.webp)
Performing spirometry
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
74
8
If the selection window is displayed, do one of the following:
a)
To add a trial to the existing test, choose
Add Trial
.
b)
To add a post to the existing test after administering a bronchodilator,
choose
Add Post
.
c)
To create a new test that is unrelated to the existing test, choose
Test
.
The screen of the selected test is displayed with a pop-up window that
asks you to block the
EasyOne Flow Tube
.
9
To set the baseline, seal off one end of the
EasyOne Flow Tube
with the
wrapper to avoid air flow.
10
Choose
OK
.
In the colored status bar,
Setting baseline: Avoid flow!
is displayed.
After the baseline has been set,
Start test …
is displayed.
11
Remove the wrapper from the
EasyOne Flow Tube
.
12
If you want to perform an FVL test, an MVV test, or an SVC test, attach the
nose clip to the patient’s nose.
13
Hand
EasyOne Air
to the patient.
14
Tell the patient to breathe at rest.
The following procedure
To perform the FVC breathing maneuver
represents the breathing maneuver for the FVC test as an example. If you
want to perform any other test, replace the procedure
To perform the FVC
breathing maneuver
with the breathing maneuver for the required test.