Performing spirometry
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
74
7.5.2
Choosing a test and selecting an existing patient
If you test a patient that you have tested before or if you have transferred
patient data onto
EasyOne Air
from
EasyOne Connect
on your PC, start by
selecting an existing patient.
Prerequisites
Previously, you have manually added the patient to
EasyOne Air
.
Or, you have transfered patient data onto
EasyOne Air
from
EasyOne Connect
on your PC.
Working with patient data and reports on EasyOne Air, 82
Copying patient data between EasyOne Air and EasyOne Connect, 88
1
If you want to perform an FVC test, choose
.
The patient selection list is displayed.
2
If you want to perform any other test, do the following:
a)
Choose .
b)
Choose one of the test icons.
The patient selection list is displayed.
3
Select a patient.
If the patient has performed a test within the previous 24 hours, the
question window is displayed. Proceed with step
4
.
If the patient has not performed a test before or not within the previous
24 hours, the summary screen is displayed. Step
4
does not apply.
4
If the question window is displayed, do one of the following:
a)
To add a trial to the existing test, choose
Add Trial
.
b)
To add a post to the existing test after adminstering a bronchodilator,
choose
Add Post
.
c)
To create a new test that is unrelated to the existing test, choose
Create
new
.
The summary screen is displayed.
Performing a complete test using EasyOne Air stand-alone, 57
?
