Connectivity and data exchange
Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect
© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch
50
In the orders menu, you process the orders. The orders menu is similar to the
patients menu. However, you cannot edit patient data in the orders menu.
1
Choose
Orders
.
2
Select an order with the status
Pending
.
3
Choose
Test
.
4
Perform spirometry with the patient.
5
To view a completed order, choose
View
.
6
To delete an order, choose
Delete
.
7
Repeat steps
2
to
5
until you have completed all pending orders.
8
Choose
Close
.
All results are transmitted to your EMR system.
Overview of the user interface of EasyOne Connect, 34
6.2.6.2
Initiating a spirometry test with the direct-start workflow
With the direct-start workflow, you initiate spirometry from your EMR system.
All plug-ins support this workflow.
Prerequisite
You have configured any one of the available plug-ins.
About the XML file exchange plug-in, 48
1
Launch your EMR system.
2
Choose the external devices menu.
3
Select either
EasyOne Connect
or
EasyOne Pro/LAB
and confirm.
EasyOne Connect
is launched automatically.
In
EasyOne Connect
or on
EasyOne Pro/LAB
, the screen for entering
patient data is displayed.
4 CAUTION!
False diagnosis: The predicted values and the system
interpretation are based on the patient demographic data. Therefore,
wrong patient data can cause false results. Enter patient data
meticulously. Double-check that you have entered the patient data
correctly.
Fill out those fields that are marked with an asterisk (
*
).
You cannot complete adding patient data without filling out these
fields.
5
In all other fields, enter additional patient data if necessary.
6
Choose
OK
.
7
Choose the desired test and confirm.
8
Perform spirometry with the patient.
