manualshive.com logo in svg

NDD EasyOne, Operator'S Manual

Share
Download
NDD EasyOne Operator'S Manual Download Page 4

Preface

Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect

© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch

4/144

4

 

1.9

About electromagnetic interference

This device complies with part 15 of the FCC rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, 
and (2) this device must accept any interference received, including 
interference that may cause undesired operation.

For the US, see 47 Code of Federal Regulations Sec. 15.19(a)(3)

This Class B digital apparatus complies with Industry Canada RSS standards.

For Canada, see RSS-Gen — General Requirements for Compliance of Radio 
Apparatus

1.10

Contact information

1.11

Product registration

Registering 

EasyOne Air

 facilitates the handling of warranty claims.

To register 

EasyOne Air

, go to the 

ndd

 website.

http://reg.ndd.ch
For the US http://reg.nddmed.com

1.12

Disposal

ndd Medizintechnik AG

ndd Medical Technologies

Technoparkstrasse 1

300 Brickstone Square, Suite 604

CH-8005 Zurich, Switzerland

Andover, MA 01810, USA

Tel: +41 44 445 2530

Tel: +1 978 470 0923

Fax: +41 44 445 2531

Fax: +1 978 470 0924

www.ndd.ch

www.nddmed.com

In the European Union, the product you have purchased should not be 

disposed of as unsorted municipal waste. Please make use of your local 

WEEE collection facilities to dispose of this product and otherwise observe 

all applicable requirements.

Summary of Contents for EasyOne

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands