manualshive.com logo in svg

NDD EasyOne, Operator'S Manual

Share
Download
NDD EasyOne Operator'S Manual Download Page 47

Connectivity and data exchange

Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect

© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch

47/144

50

 

6.2.5

Overview of the plug-ins for EMR systems

Utilities > Configuration > EMR

6.2.5.1

About the HL7 plug-in

The HL7 plug-in allows you to work with orders, which you can process as you 
choose. This workflow is the order workflow.
Alternatively, you can use the direct-start workflow and initiate spirometry 
from your EMR system.

Supported Features

EasyOne Connect

 and 

EasyOne Pro/LAB

 support the following features of HL7:

• Receiving patient demographics from your EMR system
• Sending test results to your EMR system
• Working with orders
• File-based message exchange
• Message acknowledgments
• Sending discrete data
• Sending reports

Application Note 

EasyConnect: HL7 Connector

Application Notes for further information, 3

Operator’s Manual of your EMR system
Processing orders from your EMR system, 48

Sending individual test results to your EMR system, 50

6.2.5.2

About the GDT plug-in

With the GDT plug-in, you can only use the direct-start workflow and initiate 
spirometry from your EMR system. The order workflow is not supported.

Supported Features

EasyOne Connect

 and 

EasyOne Pro/LAB

 support the following features of GDT:

• Receiving patient demographics from your EMR system
• Sending test results to your EMR system
• File-based message exchange
• Sending discrete data
• Sending reports

Operator’s Manual of your EMR system
Initiating a spirometry test with the direct-start workflow, 49

Sending individual test results to your EMR system, 50

Type, 113

Summary of Contents for EasyOne

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands