manualshive.com logo in svg

NDD EasyOne, Operator'S Manual

Share
Download
NDD EasyOne Operator'S Manual Download Page 140

Appendix

Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect

© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch

140/144

144

A

Appendix

A.1

Electromagnetic Compatibility (EMC)

A.1.1

General

A.1.1.1

Environment

See:

Intended use of the EasyOne Air spirometer, 2

A.1.1.2

EMC conformance

EasyOne Air

 is EMC-tested in conformity with the requirements of 

IEC 60601-1-2:2007 3

rd

 edition (see the following tables) and 

IEC 60601-1-2:2014 4

th

 edition (according clause 7 and 8.9, tables 4 to 9). 

EasyOne Air

 is a medical device that requires special safety precautions and 

must be installed and placed in operation in accordance with the information 
given in tables below.

A.1.2

Safety information

See:

Safety information regarding electromagnetic compatibility, 14

A.1.3

Compliant cables and accessories

WARNING

INCREASED EMISSIONS OR DECREASED IMMUNITY
The use of accessories, transducers and cables other than those specified 
may result in increased emission or decreased immunity performance of the 
equipment or system.
The table below lists cables, transducers, and other applicable accessories 
with which the manufacturer claims EMC compliance.

Accessories that do not affect EMC compliance are not included in the 
following list.

List of box contents, 17

USB cable micro to type A, shielded, 1.8 m
USB cable micro to type B, shielded, 1.8 m

ndd

 power supply 5.0 V DC

Accessories with which the manufacturer claims EMC compliance

Summary of Contents for EasyOne

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands