manualshive.com logo in svg

NDD EasyOne, Operator'S Manual

Share
Download
NDD EasyOne Operator'S Manual Download Page 32

Introduction

Operator’s Manual V1.1 • EasyOne Air • EasyOne Connect

© ndd Medizintechnik AG • Technoparkstrasse 1, 8005 Zurich, Switzerland • www.ndd.ch

32/144

39

 

The status bar

The status bar on the top of the home screen displays basic status 
information.

The status bar on the top

The status bar displays the following icons:

Indicates that Bluetooth is enabled. This icon is not applicable to the 

EasyOne Air TL

 variant.

Indicates that Wi-Fi is enabled. This icon is not applicable to the 

EasyOne Air TL

 variant.

Indicates a connection to a printer.

Indicates a connection to a PC.

Indicates that an SD memory card is inserted.

Indicates that charging level of the battery is very low.

Indicates that 

EasyOne Air

 is connected to the 

ndd

 power supply and 

currently charging. But the charging level is still low.

Indicates that 

EasyOne Air

 is connected to the 

ndd

 power supply and 

currently charging. The charging level is at about 50%.

Indicates that 

EasyOne Air

 is connected to a power supply, but cannot 

charge.

Check whether 

EasyOne Air

 is connected to the 

ndd

 power supply or to a 

different USB power source.

Only use the 

ndd

 power supply.

Indicates that the health of the battery is low.

Consider replacing the battery.

Summary of Contents for EasyOne

















































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands