NCR 74 OFX (7874), User Manual

Page: 104 / 268

4-12 Chapter 4: Operation
Scanning Procedure
25507
To scan items with the NCR RealScan 74, use the following procedure.
1. Verify the scanner is ready (Scan Adviser’s 3 center LEDs are green).
2. Pass the item across the RealScan 74 lower window. Slide the item from the
checkstand, across the Top Plate, and back onto the checkstand.
3. If a good read occurs, the Scan Adviser flashes 5 green LEDs and a tone is emitted
(if programmed).
If the Scan Adviser does not flash, the RealScan 74 did not read the bar code label. Try
to orient the label and scan the item again. If this does not work after two (2) more
tries, manually enter information for the item. Then continue to scan.
Weighing Procedure
25506
Top Plate
Scale Zero Button
Weigh items using the following procedure.
1. Verify the display reads 0.000 kg (0.00 lb).