ZephIR user manual QP1009-582 v2
© Natural Power 2008
10
th
June 2008
Page 50
Wiper blade replacement
Should it become necessary to change the wiper blade
before or during a deployment then the following
guidelines will help with this process. The blade needs
to be changed with the correct blade for the system, the
correct part number can be found in the spares list.
Step1: Firstly lift the wiper arm away from the window as
in the photo below.
Step 2: Holding the wiper arm and the wiper blade near
the middle, pull the blade away from the arm.
Step 3: Take the new blade and clip it back into the middle
of the wiper arm until fully home.
Step 4: Replace the wiper arm on the widow of the unit
and perform a wash/wipe test from the ZephIR software.
