![Natural Power ZephIR Operation & Maintenance Manual Download Page 32](http://html1.mh-extra.com/html/natural-power/zephir/zephir_operation-and-maintenance-manual_3430886032.webp)
ZephIR user manual QP1009-582 v2
© Natural Power 2008
10
th
June 2008
Page 32
2.
Raw Data Playback
This should be considered an ‘advanced’ mode and
requires a degree of understanding not covered in this
document.
Raw data playback is performed in exactly the same way
as wind data playback, except that ‘File’ > ‘Open Raw Data
File’ should be selected from the drop down menus.
Once playback has begun, the settings in the playback
frame can be changed on the fly. Statistics will be
displayed in the status bar.
If ‘Process RAW data’ is selected then fit data will be
displayed in the ‘Data Fit’ and ‘Figure of Eight’ boxes.
To save the processed wind data, select ‘File’ >’Save Wind
Data’. Once an output filename has been selected, the
software will run through the open raw data file, convert
it to wind data using the current settings and write it to
disk. The resulting wind data file can then viewed as any
other.