Native Instruments MASCHINE MK3, Manual

Page: 73 / 891

Setting Description
Sync
Mode Off : No MIDI sync mode is selected.
Master (Send Clock) : If MASCHINE is running as a stand-alone
application, it can also send a MIDI Clock signal to any device that
is capable of receiving MIDI Clock. This could be hardware such as
a drum machine, another groovebox, or even another software
sequencer.
Slave (Receive Clock) : If MASCHINE is running as a stand-alone
application, it can be controlled externally via MIDI Clock by any
device that is capable of sending MIDI Clock. This could be
hardware such as a drum machine, another groovebox or sequencer,
or even another software sequencer.
Please note that the
Slave (Receive Clock) option is not available
when LINK is active. For more information on Link see
↑
2.8,
Syncing MASCHINE using Ableton Link .
Clock Offset (appears
when Mode is set to
Slave )
Use the Clock Offset control to compensate delay that may occur
during MIDI data transmission. Delayed MIDI Clock data will cause
external devices to respond too late, thus making your track sound
out of sync.
By adjusting the
Clock Offset value you can set an amount of
latency to be compensated (in milliseconds). MASCHINE will then
send MIDI Clock events ahead of time as defined.
Devices
Basic Concepts
Preferences
MASCHINE - Manual - 73