Native Instruments MASCHINE MK3, Manual, Page: 406 / 891

If the Patterns of the deleted Pattern bank were referenced by Clips in the Arranger,
these Clips will be removed as well!
7.7.6 Naming Patterns
You can replace the Patterns’ default names with custom names of your own. This can be done
in the Pattern Editor, in the Pattern Manager or in the Arranger.
Renaming Patterns in the Pattern Editor
To rename the selected Pattern in the Pattern Editor:
1.
Double-click the Pattern name at the top left of the Pattern Editor:
2. Type a name and press [Enter] on your computer keyboard to confirm (or press [Esc] to
cancel you change).
→
The Pattern is renamed. In the Arranger, all Clips referencing this Pattern in the Arranger
will mirror the new Pattern name.
Renaming Patterns in the Pattern Manager
To rename any Pattern even if it is not selected:
1.
Open the Pattern Manager (see
↑
7.7.1, The Pattern Manager and Pattern Mode ).
2. If necessary, select the Pattern bank containing the desired Pattern by clicking its pad
grid on the right.
The selected Pattern bank is surrounded by a white border and its Patterns appear in the
list on the left.
Working with Patterns
Managing Patterns
MASCHINE - Manual - 406