•
2D Mechanical Drawings and 3D Models
•
SLSC-12101 PCB Drawing
Required Software
•
NI LabVIEW 2015 or newer
•
NI-SLSC driver
•
To customize the CPLD: Quartus Design software, found on Quartus Software's website
1
•
To customize the Flash:
createNvmemImage.py
, included in the SLSC MDK files
Other Files
•
SLSC-12101.vi
—Example VI to access the SLSC-12101 properties.
Getting Started with the SLSC-12101
The SLSC-12101 can be inserted into an SLSC chassis and used the way it is shipped.
Note
The SLSC chassis and SLSC modules do not support hot plug-in. The entire
chassis must be powered down when a module is installed or removed.
1.
Ensure the CPLD power supplies are properly set.
After taking the module out of its packaging, check that three jumpers are inserted
between pins 5 and 10 of headers W2, W3, and W4. This ensures that the voltage is set to
3.3 V for the CPLD I/O banks 2, 3, and 4.
1
Quartus Design Software is offered in a variety of editions with different features and price ranges.
Refer to the Quartus Software website for more information.
SLSC-12101 User Guide
|
© National Instruments
|
3