Figure 11. Front Connector Pinout
PIN 31
PIN 44
PIN 30
PIN 15
PIN 1
PIN 16
Prototyping Area
The front connectors J10 and J11 (labeled J1 and J2 on the front panel) are routed directly to
the prototyping area without any series resistors. The traces have 50 Ω characteristic
impedance and support a maximum of 400 mA.
All signals from the CPLD to the prototyping area are routed with 50 Ω characteristic
impedance traces and have a 33.2 Ω series resistor places near the CPLD.
All connections between XJ2 and the RTI prototyping area are routed with 50 Ω characteristic
impedance without any series resistors.
The connections between XJ3 and the RTI prototyping area with high current traces are
capable of carrying 8 A each. For more information, refer to the SLSC-12101 Specifications,
which can be found on
ni.com/manuals
.
Hole Marking Codes
Holes in the prototyping area are marked according to their purpose, as shown below.
SLSC-12101 User Guide
|
© National Instruments
|
23