97
NATIONAL
INSTRUMENTS
OUTPut:TTLTrg:MODE
Sets the operation of the Trigger Out signal to either OFF, Function Strobe or Trigger mode.
Programming Mode NONE, FIX:
• In TRIG mode, trigger is generated when output status changes.
• In Function Strobe mode, an output pulse is generated automatically any time an output
parameter such as output, voltage or current is programmed.
Programming modes LIST or WAVE:
• In TRIG mode, trigger is generated when LIST or WAVE is completed.
• In Function Strobe mode, an output pulse is generated automatically any time a step is
completed.
The power supply Trigger Out signal is available at J3-3 connector on the rear panel.
SCPI Command Syntax
OUTPut:TTLTrg:MODE <CRD>
GEN Command Syntax
None
Parameters
TRIG| FSTR|OFF
*RST Value
OFF
Examples
OUTP:TTLT:MODE TRIG
Query Syntax
OUTP:TTLT:MODE?
Returned Parameters
<CRD>
OUTPut:RELay1(2):STATe
Sets pin J3-1 (1) and J3-6 (2) state. The ON parameter is according to low level.
SCPI Command Syntax
OUTPut:RELay1(2)[:STATe] <bool>
GEN Command Syntax
REL1(2) <bool>
Parameters
0|OFF 1|ON
*RST Value
1
Examples
OUTP:REL1(2) 1 OUTP:REL1(2) ON
Query Syntax
OUTPut:REL1(2)[:STATe]?
Returned Parameters
0|1
OUTPut:MODE?
Returns the power supply operation mode. When the power supply is On (OUT 1) it will return
”CV” or ”CC”. When the power supply is OFF (OUT 0) it will return ”OFF”.
SCPI Query Syntax
OUTPut:MODE?
GEN Query Syntax
MODE?
Returned Parameters
<CRD> CV|CC|OFF
Summary of Contents for RMX-410 Series
