National Instruments RMX-410 Series, User Manual

Page: 108 / 132

107
NATIONAL
INSTRUMENTS
7.12.10 SYSTem Subsystem
SYSTem:ERRor:ENABle
Enables Error messages.
SCPI Command Syntax SYSTem:ERRor:ENABle
GEN Command Syntax None
Parameters None
Returned Parameters None
SYSTem:ERRor?
Returns the next error number and corresponding error message in the power supply error queue.
Works as FIFO. When no error exists 0, ”No error” is returned.
SCPI Command Syntax SYSTem:ERRor?
GEN Command Syntax None
Parameters None
Returned Parameters <NR1>,<CRD>
Example SYST:ERR?
SYSTem:LANGuage
SCPI Command Syntax SYSTem:LANGuage GEN
GEN Command Syntax None
Query Syntax SYSTem:LANGuage?
Returned Parameters SCPI
SYSTem:REMote
Sets the power supply to local or remote mode.
SCPI Command Syntax SYSTem:REMote[:STAte] <CRD>
GEN Command Syntax RMT
Parameters LOC/0|REM/1|LLO/2
*RST Value LOC
Example SYST:REM REM
Query Syntax SYST:REM?
Returned Parameters LOC|REM|LLO
SYSTem:VERSion?
SCPI Command Syntax SYSTem:VERSion?
GEN Command Syntax REV?
Returned Parameters Rev:<CRD>
Example Rev:1.010