GT20 Control Wiring and Programming Manual
Part #C-00140
Rev. 10-7-16
6-22
Initial Setup Procedure
CHAPTER 6: INITIAL SETUP PROCEDURE
Section 6a: The Joystick
Notice: Elements/Values within all Menus are Password protected. When prompted for a password, push
the Joystick three times to the left, then three times to the right.
DN 1187
Display
Joys ck
Figure 6-1
Display and Joystick
X
To Enter Menu Pages from the Home Page:
•
Briefly push down on the Joystick.
X
To select a Menu:
•
Move the Joystick to the Right to scroll through Menu options (Left to scroll backwards).
•
Briefly push down on the Joystick to (OK) selection.
•
The Element Page will be displayed.
•
If ESC is selected the Home Page will be displayed.
X
To select or change an Element option:
•
Enter the Password (the Element Page will automatically be displayed).
•
Move the Joystick Down to scroll through Element options (Up to scroll backwards).
•
Briefly push down on the Joystick to (OK) selection.
•
The Value will start to blink (located on the lower half of the screen).
•
If ESC is selected the current Menu Page will be displayed.
X
To change a Value option:
•
Move the Joystick to the Right or to the Left to change a Value.
•
Briefly push down on the Joystick to (OK) selection.
•
The Value will stop blinking, indicating that the new Value has been entered.
•
Move the Joystick Down to select another Element/Value option (Up to scroll backwards).
X
To go back to previous Pages:
•
Push down on the Joystick until the Menu Page is displayed. Release the Joystick.
•
Push down on the Joystick again until the Home page is displayed. Release the Joystick.
Section 6b: Setup Procedure
During the Setup procedure, all Safety Devices are ignored by the GT20 Control.
Clear the area of any persons or objects in the path of moving Door Panel, in order to
avoid injuries or damages.
If the Parameters OHC-PH (push) and OHC-PL (pull) are confused, it can be dangerous
for the Installer (because the door opens in the opposite direction).
WARNING
WARNING
WARNING