MUTOH ValueJet VJ-1604, Maintenance Manual

Page: 332 / 422

9 Troubleshooting VJ-1604 Maintenance Manual
Rev.-00 9-10
6 Insert specified
cartridge Specified ink
cartridge is not
installed. 1. Check if the same
message appear if
turning machine
OFF and turn it ON
again.
If the message appears:
Refer to the action in
check item No. 2. -
2. Check if specified
ink cartridge is
used.
Replace ink cartridge
with specified one. Operation
Manual
3. Check if ink
cartridge status
detection operates
normally from "Ctrl
2: Sensor" ->
"Sen.3:etc" -> "7-
10:[KCMY] Ink
ID" of self-
diagnosis function.
If detection does not
operate normally,
replace following parts.
•
Ink sensor assembly
• Main board
assembly
• Ink ID sensor
assembly
"4.10.1
Replacing
Ink ID Board
Assembly"
p.4-125
"4.4.7
Replacing
MAIN
Board" p.4-
49
4. Check contact of
ink ID sensor
assembly
connector.
- Reconnect following
MAIN board assembly
connectors.
MAIN board: J43
HEATER JUNCTION
board:
•
Connector J5(K)
• Connector J6(C)
• Connector J7(M)
• Connector J8(Y)
If no change occurs,
proceed to step (5).
"4.4.7
Replacing
MAIN
Board" p.4-
49
Table 9-3 Symptoms and Check Items for Errors with Message(Continued)
No. Message Event/
symptom
Check item Action Reference