MUTOH ValueJet VJ-1604, Maintenance Manual

Page: 277 / 422

VJ-1604 Maintenance Manual 7 Adjustment
7-3 Rev.-00
7.1 Introduction
This chapter provides information on necessary adjustment items and procedures.
TIP
"8.4 Jigs and Tools" p.8-6
7.2 Adjustment Item
This section describes the adjustment items required in part replacement procedures.
When you adjust or replace any of the maintenance parts listed in "Table 7-1 Adjustment Item List", you must
always adjust the plotout quality using the self-diagnosis function referring to Table 7-1"Adjustment Item
List"(p.7-3).
Table 7-1 Adjustment Item List
Part replaced or
adjusted
Adjustment
order
Adjustment item Reference
Printer head 1 Head rank input (including initial ink
charge) "(1) Head Rank"
p.5-50
"5.6 Ink Charging
Menu" p.5-22
2 Head nozzle check "5.7.1 Head Nozzle
Check Menu" p.5-25
3 Head slant check "5.7.3 Head Slant
Check Menu" p.5-28
"7.7 Head
Accuracy
Adjustment" p.7-30
4 Uni-D / Bi-D Low Adjustment
Uni-D / Bi-D High Adjustment "5.7.5 Uni-D/Bi-D
Low/High
Adjustment" p.5-33
5 Test printing "5.7.7 Test
Printing Menu" p.5-39
6 Reset of head unit life counter "5.11.1 Parameter
Initialization Menu"
p.5-47