MUTOH ValueJet VJ-1604, Maintenance Manual

Page: 128 / 422

4 Parts Replacement VJ-1604 Maintenance Manual
Rev.-00 4-86
12. Pull out the measure from the hole of the return pulley mounting plate.
13. Affix the steel belt to the tip of the measure using tape.
14. Wind up the measure with the steel belt affixed to it.
15. Detach the steel belt from the measure after the tip of the measure comes out from the hole of the
Y drive
base.
16. Affix one side of the steel belt to the right side of the carriage.
17. Install the CR driven pulley.
No. Part name
1 Measure
2 Y drive base
3 Return pulley mounting plate
No. Part name
1 Measure
2 Steel belt
3 Tape
3 2
1
View of origin side View of opposite side to origin
1
1
3
2