MUTOH ValueJet VJ-1604, Maintenance Manual

Page: 115 / 422

VJ-1604 Maintenance Manual 4 Parts Replacement
4-73 Rev.-00
4. Remove the connectors (2 pieces) to the platen heater and the connectors (2 pieces) to the platen
thermistor.
5. Remove the heat insulator heater or the heat insulator thermistor from the part where the heater or the
thermistor is broken.
TIP
The heat insulator platen, the h eat insulator thermistor and the platen heater are affixed using
double-faced tape.
6. Mark the location of the broken platen heater.
NOTE
Affix the platen heater at the correct position. If not, the temperature of the platen cannot be
appropriate and image quality may be affected.
7. Remove the broken platen heater.
8. Replace the platen heater.
9. Remove the screw (1 piece) that retains the platen thermistor holder.
10. Detach the platen thermistor holder.
11. Replace the platen thermistor.
12. To reassemble the unit, reverse the removal procedure.
No. Part name
1 Heat insulator platen
2 Connectors to the platen heater
3 Connectors to the platen thermistor
4 Heat insulator thermistor
2
3
1
4
Rear view of platen