MUTOH ValueJet VJ-1604 Page 54 Maintenance Manual Download

Page: 54 / 422

4 Parts Replacement

VJ-1604

Maintenance Manual

Rev.-00

4-12

2. Lift up and remove the side maintenance cover R.

3. To reassemble the unit, reverse the removal procedure.

4.2.5

Removing Side Maintenance Cover L

1. Remove the screws (2 pieces) that retain the side maintenance cover L.

2. Lift up and remove the side maintenance cover L.

3. To reassemble the unit, reverse the removal procedure.

4.2.6

Removing Side Top Cover R

NOTE

Before removing the side top cover R, close the front cover.

1. Remove the side maintenance cover R.

"4.2.4 Removing Side Maintenance Cover R" p.4-11

No.

Part name

Side maintenance cover L

Screws that retain the side maintenance cover L
(pan-head screw with spring washer and flat washer M4

Summary of Contents for ValueJet VJ-1604







































































































































































































































































































































































































































Search results

Summary of Contents for ValueJet VJ-1604

Reviews:

Related manuals for ValueJet VJ-1604

Brands by name

Popular brands

MUTOH ValueJet VJ-1604, Maintenance Manual

Search results

Summary of Contents for ValueJet VJ-1604

Reviews:

Related manuals for ValueJet VJ-1604

Brands by name

Popular brands