MUTOH ValueJet VJ-1604, Maintenance Manual

Page: 85 / 422

VJ-1604 Maintenance Manual 4 Parts Replacement
4-43 Rev.-00
2. Detach the connectors listed below from the HEATER CONT board.
Table 4-2 Connectors to HEATER CONT board
No. Connector
No.
# of
Pins
Color Connect to Remark
1 J1 8 Black Config CN
2 J2 2 White Feeder Motor
3 J3 6 White Feeding Unit Sensor
4 J4 4 White Roll Motor
5 J5 7 White Roll Unit Sensor
6 J6 40 Black HEATER RELAY A (J3) FFC
7 J7 40 Black Not in use
8 J8 4 White DC IN [HEATER JUNCTION (J2)]
9 J9 8 Gray Communication [HEATER JUNCTION
(J3)] LAN
10 J10 8 Gray LVS [MAIN (143)] LAN
11 J11 5 White Debug
12 J12 5 Yellow SMARTCARD Not in use
13 J13 RSV IN 1 Not in use
14 J14 RSV OUT 1 Not in use
15 J15 RSV OUT 2 Not in use
16 J16 RSV IN 2 Not in use
17 J17 THRM 1 Not in use
18 J18 THRM 2 Not in use
19 J19 8 White DC IN -> [MAIN J46]
20 J20 2 White AC OUT -> DC5V/24V (CN1)
21 J21 3 Red POW-ON -> POW [MAIN (J45)]
22 J22 2 White AC-IN -> Terminal Stand
23 J23 2 White EXT-AC-OUT -> HEATER RELAY A
(J1)