MUTOH ValueJet VJ-1604, Maintenance Manual

Page: 259 / 422

VJ-1604 Maintenance Manual 5 Self-Diagnosis Mode
5-61 Rev.-00
5.13.5 General Endurance Menu
This menu performs the general endurance running.
You can operate various driving systems according to your desired settings.
The available settings are shown below.
TIP
• In the general endurance menu, the following operations are performed as one cycle of endurance
running
• Carriage stroking: 1 stroke
• Media feed: 1 cycle
• If the number of endurance running cycles is set to -1, the carriage continuously repeats stroking
until cancel input is given from the operation panel.
• The maximum counter value for endurance running cycles is 99999999 (up to 8-digit number). If
the number of cycles exceeds the maximum value, the counter is reset to 0.
Table 5-23 Set Items in General Endurance Menu
Set item Contents Set value Remark
Running speed (CW,
CCW) Set the carriage running
speed (CW direction,
CCW direction) 240, 320, (400)
* 400 CPS cannot be
selected depending on
versions. Unit: cps
Media feed amount Set the media feed
amount per cycle 0.1 to 100 Unit: mm
Number of endurance
running cycles Set the number of
endurance running cycles -1 to 10000
CW-speed
CCW-speed
Media feed amount
Endurance count
[Enter] key
[Enter] key
[Enter] key
[Enter] key
[Enter] or [Cancel] key
Performing endurance running