Rockhopper II series printers – User’s Guide
174
AP-75095, Rev. 2.0, 24/10/03
7.5. TRANSFER AND TRANSPORTATION
This section explains transferring and transporting the printer.
7.5.1. Transferring the printer
Following are instructions for transferring the printer.
Caution :
•
Keep the printer horizontally during transfer.
•
Do not tilt the printer, stand it against a wall, or turn it upside down. Doing so may
cause ink to leak inside the printer. Also, movement after transport is not covered
by the warranty.
•
Have two or more people to transport the printer.
(1) Before the transfer
If you are using the stand, follow the steps below to transfer the printer.
Step 1 :
Make sure the printer is turned off.
Step 2 :
Make sure the head is in the right edge position (capping position).
Step 3 :
Disconnect the power cable and all other cables.
Step 4 :
Release the locks on the casters.
Step 5 :
The four adjusters are turned in the direction shown on the diagram.
Step 6 :
Transfer the printer.
Notes :
•
The caster attached to the stand has been designed for transferring the printer
during short distances.
Summary of Contents for Rockhopper II Series
