MUTOH Rockhopper II Series, User Manual

Page: 147 / 190

Rockhopper II series printers – User’s Guide
147
AP-75095, Rev. 2.0, 24/10/03
3 You used bond media. Use recommended media. Refer to ‘Media type’
4 The printed surface is not the
printable side. Pay attention to the
printable side to load
media correctly. Refer to ‘Media handling’
5 Did you try head cleaning ?
•
Perform head cleaning.
•
Perform strong
cleaning.
•
Clean the surface of the
print head.
•
Perform long save
cleaning.
Refer to ‘Head cleaning’
Refer to ‘Cleaning the cleaning
wiper’
(18) White or black lines on printouts.
No. Possible cause Solutions References
1 You did not use recommended
media. Use recommended media. Refer to ‘Media type’
(19) Lines are missing.
No. Possible cause Solutions References
1 The validity date of the ink cartridge
has been expired. Use a new ink cartridge. Refer to ‘Replacing ink cartridges’
2 You did not use recommended
media. Use recommended media. Refer to ‘Media type’
3 Did you try minor adjustments for
image quality ? Try minor adjustments for
image quality. Refer to ‘Alignment’
(20) "Bubbles" near the Heaters.
No. Possible cause Solutions References
1 You did not use recommended
media. Use recommended media. Refer to ‘Media type’
2 You did not set the correct heater Lower the temperature or
turn off the Heater Refer to ‘controlling the heater
elements’
(21) Top Feed problem.
No. Possible cause Solutions References
1 Media jam occurred due to a need
for Top feed. Insert a minimum Top
Feed Refer to ‘Top Feed menu’