MUTOH Rockhopper II Series, User Manual

Page: 111 / 190

Rockhopper II series printers – User’s Guide
111
AP-75095, Rev. 2.0, 24/10/03
Setup items Parameters Description
• MAC address Display MAC address of the network interface board. MAC address
- To shift to the previous hierarchy menu.
Refer to ‘Network setting menu’
5.4.61. Version menu
The following software versions of the network interface board can be checked.
• Main version: software version (Main version)
• Sub version: boot version
* Version *
Current parameter
→
Main Ver. 1.00 a
Current parameter
→
Sub Ver. 1.00a
Setup items Parameters Description
• Main version
• Sub version The software version of the network interface board is
displayed. Version
- - To shift to the previous hierarchy menu.
Refer to ‘Network setting menu’
5.4.62. Utility menu
To perform various settings for application functions of products.
* Utility *
F1
→
ErrorDisp. Detection
←
F2
F3
→
OnCleaning Width
←
F4
(1/1)
Setup items Parameters Description
ErrorDisplay To set display method to the operation panel when
minor error occurred.
Refer to ‘ErrorDisplay menu’
Media detection When media has been initialized, to perform detection
of width and edge of the media.
Refer to ‘Media detection menu’
Power on cleaning When cleaning should be performed automatically with
the power is turned on.
Refer to ‘Power on cleaning menu’
Media width If media detection is not performed for initial media, to
set the width of the media in the tray.
Refer to ‘Media width menu’
Utility
- • [CANCEL] key: To shift to the previous hierarchy
menu.
Refer to ‘Setup menu’