MUTOH Rockhopper II Series, User Manual

Page: 102 / 190

Rockhopper II series printers – User’s Guide
102
AP-75095, Rev. 2.0, 24/10/03
5.4.41. Online time out menu
To set time from the moment of receiving termination of printing data sent by computer to the recognition of end
of printing data.
* OnlineTimer *
OFF – 800sec +
←
F2
30sec - ←
F4
F2, F4
→
ENTER
Setup items Parameters Description
OnlineTimer OFF/2sec. - <30sec.> -800sec. To change the Online time out time by operating the
following keys.
• [F2] key: Increases the setup value.
• [F4] key: Decreases the setup value.
• [ENTER] key: Confirms the setup value, shifts to the
previous hierarchy menu.
• [CANCEL] key: Cancels the setup value, shifts to the
previous hierarchy menu.
Refer to ‘Command setup menu’
5.4.42. Overwrite menu
To set the printing method for areas where figures overlap on the printing data.
* Overwrite *
F1
→
Last Mix
←
F2
Current parameter
→
- Last -
(1/1)
Setup items Parameters Description
<Last> The colour of the print created afterward is given
priority.
Mix The colours of overlapping areas are mixed and
printed.
Overwrite
- To shift to the previous hierarchy menu.
Refer to ‘Command setup menu’
5.4.43. Halftone menu
When creating prints of MH-GL/GL2 (vector) data and RTL-PASS (raster) data that has not been converted into
binary, to set the gradation sequence representation method.
* Halftone. *
F1
→
Speed Quality
←
F2
F3
→
Thin
Current parameter
→
- Speed -
(1/1)