Rockhopper II series printers – User’s Guide
162
AP-75095, Rev. 2.0, 24/10/03
Step 8 :
While slightly pressing the cutting blade holder tab, return the cutting blade lever to its original
position.
Notes :
•
Do not push the cutting blade holder tab strongly or release it suddenly. Doing so
may cause the spring incorporated in the cutting blade holder to fly off.
•
Do not push in the cutting blade holder. Doing so may cause the cutting blade to
damage the inside of the printer.
•
Attach the cutting blade holder lever correctly, referring to the diagram below. If it is
not attached correctly, errors may occur.
If an error occurs, make sure that the cutting blade holder lever is attached correctly.
1. Cutting blade holder lever
2. Cutting blade holder
Step 9 :
Close the front cover.
1. Front cover
Summary of Contents for Rockhopper II Series
