Rockhopper II series printers – User’s Guide
57
AP-75095, Rev. 2.0, 24/10/03
4.6. MEDIA HANDLING
Media handling, attaching media, and setting media type are explained below.
4.6.1. Loading sheet media
The procedure for loading sheet media is explained below.
You can use the following sheet media with your printer.
50”
model
64”
model
87”
model
Width
A4 to 1273 mm max.
A4 to 1651 mm max.
A4 to 2240 mm max.
Length 1300
mm
max.
To load sheet media, follow the steps below.
Notes :
•
If roll media is attached to the printer, wind the media up and then load the sheet
media.
Step 1 :
Turn the printer on.
Step 2 :
The printer starts the initialize operation.
¾
The following message is displayed on the operation panel.
→
Paper End
Heaters
Cleaning
Cut&Feed
Lever
Up
User1
xxxm
Notes :
•
If you do not want to use the media detection at the media initialization: Set to "OFF" in
the media detection setup item.
Step 3 :
Verify if the sheet lamp on the operation panel is unlit.
Summary of Contents for Rockhopper II Series
