Rockhopper II series printers – User’s Guide
50
AP-75095, Rev. 2.0, 24/10/03
4.4. TURNING THE POWER ON/OFF
The method to turn the power ON or OFF is described below.
Caution :
•
Before powering ON the unit, make sure the waste bottle is installed.
4.4.1. Turning the power ON
Turn the power of the unit ON according to following procedure.
Step 1 :
Press the [POWER] key of the operation panel, to turn the unit ON.
¾
The POWER lamp of the operation panel will light (green).
Step 2 :
The unit will initial startup operations.
Step 3 :
After finishing initial startup operations, the unit will enter the normal operating condition.
Notes :
•
If there are any problems during the initial startup operation, the unit will display a
message on the operation panel, and the operation may stop. If the operation stops,
refer to "Troubleshooting", and take the appropriate actions.
Summary of Contents for Rockhopper II Series
