Rockhopper II series printers – User’s Guide
77
AP-75095, Rev. 2.0, 24/10/03
5.4. MENU SETUP ON THE OPERATION PANEL
This section describes how to make the Menu settings on the operation panel, and setup items.
Follow the steps below to make the Menu settings.
Step 1 :
Make sure that the operation panel is normal.
Plot
OK
Heaters
Cleaning
Cut&Feed
Lever
Up
User1
xxxm
Step 2 :
Press the [MENU
↑
] or [MENU
↓
] key.
¾
The screen shows following Menu.
Current Setup Menu
→
* SetupMenu *
F1
→
Ink Status
OriginSet
←
F2
F3
→
TestPrint MediaSet
←
F4
(1/7)
Step 3 :
Set the setup menu as follows :
¾
Refer to ‘Setup menu’ – ‘Tank change menu’
Notes :
•
For functions of the operation panel with the setup menu displayed, refer to the
following :
o
Operation
panel
o
Setting
menu
display
•
For the structure of the setup menu, refer to the following :
o
Setup
menu
structure
•
When page numbers of the setup menu are displayed on the operation panel, you can
change the sequence by pressing the [MENU
↑
] or [MENU
↓
] key.
•
Each table shows the factory default settings.
Summary of Contents for Rockhopper II Series
