MUTOH Rockhopper II Series, User Manual

Page: 148 / 190

Rockhopper II series printers – User’s Guide
148
AP-75095, Rev. 2.0, 24/10/03
6.3. ERROR MESSAGES
This chapter explains the messages displayed on the operation panel both when the printer works normally and
when an error occurs, and possible solutions.
6.3.1. Status messages
The following are the status messages while the printer works normally.
(1) Displays the operational status (1)
The following operational status is displayed on the first line of the operation panel.
Plot OK
Heaters Cleaning
Cut&Feed LeverUp
User1 xxxm
No. Display Solutions References
1 Plot OK Waiting for the next operation. (media has been
loaded.) -
2 Media End The printer is waiting for the next operation.
(No media has been loaded into the printer.) Refer to ‘Media
handling’
3 Receiving The printer is receiving data. -
4 Converting The printer is converting data. -
5 Plotting The printer is printing. -
6 Warning Waste Ink
Tank
Replace the waste liquid tank. Refer to ‘Replacing
the waste liquid tank’
7 Warning Ink Tube Life Contact the dealer where you bought the printer or
MUTOH's technical support center. -
(2) Displays of the operational status (2)
The following operational status is displayed between the first and the third line of the operation panel.
Ink Refill
Wait for a while
No. Display Solutions References
1 Ink Refil **min The printer performs ink charging. Wait for a while. Refer to ‘Installing ink
cartridges’
2 During cleaning **min The printer performs head cleaning. Wait for a while. Refer to ‘Head
cleaning’
3 Media Initial ******** The printer performs initial setting of media.
Wait for a while. indicates the media type setting
made. Refer to ‘Setting
media type’
4 During discharge
Wait for a while
The printer performs head cleaning and ink
discharging. Wait for a while. Refer to ‘Changing
Ink Types’
5 During washing
Wait for a while
The printer performs a head cleaning.
Wait for a while. Refer to ‘Changing
Ink Types’