3-49
Memory Switch 70 - Operation
Switch
Initial
Setting
Adjust Usage/Comments
7
0
Display error line
0: No
1: Yes
The number of error lines contained in the received
data will be shown in the LCD.
6
0
Total line monitor
0: No
1: Yes
Allows fax communication to be heard through the
monitor speaker.
5 0
Not
used
4
0
Sort autodialer printout
0: Sort by autodialer location
1: Sort by location ID
Specifies how entries on autodialer printouts are
sorted.
3
1
Print check message if power
is lost
0: No
1: Yes
In the event of two power losses in a 40-hour
period, documents will be lost. When power is
restored, a check message will print.
2
1
Print page if error occurs
during memory transmission
0: No
1: Yes
For easy identification, the first page of a document
stored for memory transmission will print along with
a check message if an error occurs during memory
transmission.
1
1
Print check message
0: No
1: Yes
To notify the user of an error, a check message can
be printed if a communication error occurs.
0
0
Stop printing check message
for a memory transmission by
pressing the stop key
0: No
1: Yes
Determines if pressing the stop key stops printing
the check message for a memory transmission.
Memory Switch 71 - Operation
Switch
Initial
Setting
Adjust Usage/Comments
7 0
Not
used
6 0
Not
used
5
1
Print TCR with the original
page
See table below
4
0
Factory use only
3
1
Print TCR with the original
page
0: No
1: Yes
For easy identification, the first page of a document
stored for memory transmission will print along a
TCR.
2
0
Factory use only
1
0
Factory use only
0
0
Display modem speed
0: No
1: Yes
The transmit/receive speed is displayed in the LCD.
Memory switch 71 … Print TCR with the original page
Switch 3
0
1
Switch
5
0 1 0 1
When Memory transmission was OK, …
No
No
Yes
Yes
When Memory transmission was NG, …
No
Yes
No
Yes
When all broadcast transmissions were OK, …
No
No
Yes
Yes
When some broadcast transmissions were NG, …
No
Yes
No
Yes
