3-73
Unique Switch 36 - Modem
Switch
Initial
Setting
Adjust Usage/Comments
7 0
Factory use only
6 0
5 1
Silent detection sensitivity
The closer the sensitivity setting is to –16 dB, the
less likely it will be that the unit will detect low level
noise on the line. This increases the possibility for
the unit to switch using the silent detection when in
the Ans/Fax Ready mode. The closer the setting is
to –43 dB, the more likely it is to detect noise.
This will
decrease the possibility of switching due to silent
detection.
-43 dB –33 dB –26 dB –16 dB
Switch 6: 0 0 1 1
Switch 5: 0 1 0 1
4 0
Factory use only
3 0
Factory use only
2 0
Factory use only
1 1
Factory use only
0 1
Factory use only
Unique Switch 37 - Modem
Switch
Initial
Setting
Adjust Usage/Comments
7 0
Not used
6 0
Not used
5 0
Not used
4 0
3 0
The delay before post-
message is transmitted
If retraining occurs due to the low reception signal
level and delay in the telephone line, it may overlap
the second post-message. In this case, increase
the delay before the post-message is transmitted.
0 ms 100 ms 200 ms 300 ms
Switch 4: 0 0 1 1
Switch 3: 0 1 0 1
2 0
Factory use only
1 0
Factory use only
0 0
Factory use only
