3-104
When “Please Call Service” message is displayed on the LCD
To access the printer maintenance modes to determine the cause of the “Please Call Service” error message.
1. Press
MENU, *, 0, 6
.
Then select “Service Call” using the cursor key.
2. Press
ENTER
.
The kind of printer error will be displayed. If there are two or more problems, the number of problems is
displayed in the upper right of the LCD.
For example, when “Heater error” and “Drum Fuse Error” has occurred, the LCD shows:
If happens more printer troubles, press
to show the other printer error.
3. Press
STOP
to exit this mode.
Note:
See
“4.14.2 Please Call Service,”
page 4-19 to 4-21 for the printer error messages and an
explanation of each are outlined.
3.9 Monitor speaker On/Off
If you need to monitor the signals of a fax communication, turn this mode to on. You can hear the signals with
the machine’s speaker during fax transaction.
Note:
Be sure to turn this mode to off after finishing your work.
To turn on this mode, press
MENU, *, 0, 8
.
To turn off this mode, press
MENU, *, 0, 8
.
Number of errors
