3-42
Memory Switch 60 - Remote reception and TAD interface
Switch
Initial
Setting
Adjust Usage/Comments
7 0
Not used
6 1
CML relay off time after
dialing
0: 1 sec
1: 200 ms
When dialing from the keypad, phone line noise
may occur as the CML relay switches on and off.
Set this switch to “0” to avoid this.
5 0
DTMF tones heard through
handset
0: No
1: Yes
Determines if DTMF tones are produced through
the handset in off-hook dialing.
4 0
Factory use only
3 0
Factory use only
2 0
Switch to fax upon TAD
disconnect
0: No
1: Yes
In Ans/Fax Ready mode, if this switch is set to “1”,
the unit will switch to fax when any device
connected to the external telephone jack, such as a
second phone or TAD, hangs up.
1
0
Factory use only
0 0
Remote reception from fax
handset
0: No
1: Yes
Ability to perform remote reception (hook-flash
transfer) from the fax handset.
