6-38
Installing the Internet Fax board
Attaching the IF-300 to a machine which has the OP150(PCL Option)
installed.
Note:
Make sure to turn off the fax machine before proceeding with the following steps.
1. Remove the REAR COVER, and then remove the SHIELD PLATE.
2. Disconnect the connection cable of the OP-150 from the
P14A
on the main board. Then connect the
connection cable of the IF-300 to the
P14A
.
3. Remove the harness cover from the rear cover.
You will pass the connection cable through this hole.
harness cover
