v.090220
11
ENGLISH
!
AFTER RUNNING TWO YEARS,
Check the condition of the fuel line for aging. If there is any aging, hardening or
cracks, it must be replaced.
Tighten the replaced fuel line joints and check for leakage.
MAINTENANCE BEFORE LONG TERM STORAGE
If, for some reason, the engine is not to be used for a long time, it must be
maintained one time before it is stored:
Remove the fuel tank.
Drain out all fuel and clean the dirt and water inside of the tank.
Open the fuel cock, unscrew the drain plug at the bottom of carburetor, drain
fuel in carburetor thoroughly, and then, screw the drain plug to original position.
Unscrew the oil drain plug at the bottom of the crankcase and drain out the
lubrication oil in crankcase thoroughly, then tighten the drain plug.
CAUTION:
DISPOSAL OF WASTE OIL: Please use a special container to
collect waste oil from gasoline engines and send to local waste oil station for
disposing. Do not pour just anywhere.
Clean the outer surface of the gasoline engine with clean cotton, remove the
dirt and dust etc, then store the gasoline engine in a clean and dry place where
is in good ventilation condition.
Turn crankshaft and make the gasoline piston stopping at upper limit position in
order to avoid air entry.
TRANSPORTATION & STORAGE
Handle with care while loading and unloading.
Keep upright and don’t incline.
Strictly prohibit bumping the engine.
Protect from moisture during transportation.
The gasoline engine should be stored in a clean, ventilated, moisture-proof and
damp-proof place.
If storing the engine for a long time:
1. Store the gasoline engine in a clean, ventilated, moisture-proof and damp-
proof place.
2. Drain the fuel completely out of the machine (including oil in the oil-bath
type air cleaner).
1.
2.
1.
2.
3.
4.
5.
6.
MAINTENANCE
All products distributed by Airco Hong Kong Ltd. are warranted against
manufacturers’ faults and defects for a period of one year from the date of
purchase by the end user. The Company will REPAIR OR REPLACE, AT ITS OWN
OPTION, merchandise deemed by the company to be defective, provided that
is has not been misused, abused, altered, or repaired by anyone other than an
authorized repair centre. Retain proof of purchase. Return the defective product to
the place of purchase.
This warranty does not extend to parts deemed consumables, such as brad and
staple gun driver blades, grinding discs, electric motor brushes, welding contact
tips, etc. All warranty claims must have prior authorization and must be shipped
prepaid to an authorized repair depot, accompanied by a copy of the invoice
specifying the date that the item was sold to the end user. You should take any tool
with a problem back to where you purchased it, accompanied by your receipt.
WARRANTY
Airco Hong Kong Ltd.
Tel: 877.840.0840
Summary of Contents for WSG112
