manualshive.com logo in svg

Multitech ProxyServer MTPSR1-202ST, User Manual, Page: 93 / 142

Share
Download
Multitech ProxyServer MTPSR1-202ST User Manual Download Page 93

Chapter 9 - Service, Warranty, and Tech Support

93

MTPSR1-202ST

Ordering Accessories

SupplyNet, Inc. supplies replacement transformers, cables and connectors for select Multi-Tech
products. You can place an order with SupplyNet via mail, phone, fax or the Internet at:

Mail:

SupplyNet, Inc.
614 Corporate Way
Valley Cottage, NY 10989

Phone:

800 826-0279

Fax:

914 267-2420

Email:

[email protected]

Internet:

http://www.thesupplynet.com

SupplyNet Online Ordering Instructions

1.

Browse to http://www.thesupplynet.com. In the Browse by Manufacturer drop-down list,

select Multi-Tech and click 

2.

To order, type in quantity, and click 

3.

Click 

 to change your order

4.

 After you have selected all of your items click 

 to finalize the order. The

SupplyNet site uses Verisign’s Secure Socket Layer (SSL) technology to ensure your
complete shopping security.

Summary of Contents for ProxyServer MTPSR1-202ST















































































































































Reviews:

No comments