Multitech ProxyServer MTPSR1-202ST, User Manual, Page: 32 / 142

ProxyServer User Guide
32
MTPSR1-202ST
The Static Routes Setup dialog box is displayed. Select and key in the appropriate information for
setting up the static route.
Port is the type of port, usually LAN (If you have a modem connected to the WAN port and are using
it for RAS, you could set up a static route to route incoming traffic to a different network). The IP
Address must be the address of the target host or network in the static route (In our example, Static
Route IP Address 200.1.1.0 indicates that PC clients on Routers with IP addresses beginning with
200.1.1 will be included on the static route). The Address Mask is the IP subnetwork mask
(255.255.255.0) of the target host. The Gateway Address must be the IP address of the local router
(Gateway Address 192.168.2.1) on the next hop toward the target host and the port (i.e., LAN) with
which it is associated. Metric is the hop count (1) to the target host.
Once you have completed entering all the appropriate information, click OK. The static route is
entered in the Static Routes table.