manualshive.com logo in svg

Multitech ProxyServer MTPSR1-202ST, User Manual, Page: 47 / 142

Share
Download
Multitech ProxyServer MTPSR1-202ST User Manual Download Page 47

Chapter 4 - ProxyServer Software

47

MTPSR1-202ST

Statistics

Clicking on the Statistics button on the Proxy Setup dialog box displays a read-only Statistics screen
that lists  the port number, its status, baud rate, total system up time, total number of calls, total
connect time, number of packets received and sent, and the number of bytes received and sent.

Clicking on the Details button on the Statistics dialog box displays a read-only Port statistics screen
that displays all the detailed information for the WAN (or ISDN) port. Clicking on a Help button on this
screen displays a help screen that explains each of the fields on the Port statistics screen.

Clicking on the Log button on the Port Statistics screen displays a Log View screen that lists all the
calls made on the ISDN line. While waiting to connect, the modem checks for a carrier every 16
seconds and attempts to dial out 5 seconds later whether a carrier signal is present or not.

Summary of Contents for ProxyServer MTPSR1-202ST















































































































































Reviews:

No comments