Multitech ProxyServer MTPSR1-202ST, User Manual, Page: 50 / 142

ProxyServer User Guide
50 MTPSR1-202ST
Introduction
The information provided in this chapter enables multiple users to configure their PCs to access the
Internet through a ProxyServer. The procedures are divided into two sections, based on operating
platform. The first section covers configuration of Windows 98/95 PCs, and the second section
covers configuration of Windows NT (4.0 Workstation) PCs.
Before you Begin
Before you begin the client setup process, read through the following requirements:
ProxyServer
The ProxyServer was configured by the administrator who, while installing the software, determined
that the ProxyServer would either automatically assign Internet (IP) addresses, or require that they
be assigned manually to each client PC. Also, the administrator assigned an IP address to the
ProxyServer’s Ethernet port, and assigned user names and passwords to the WAN links. All these
factors play a role in client configuration. Make certain that you are aware of the decisions made prior
to setting up client PCs.
PC
To access the ProxyServer, your PC must have communications capability including hardware such
as a network card and any necessary software.
If the ProxyServer does not automatically assign an IP address to each PC, you will have to obtain it
from your network administrator. You will also need the IP address for the ProxyServer (the Gateway
address), and the IP Address of your organization’s Domain Name Server (DNS). All these items are
needed so your PC can identify the ProxyServer as its gateway and properly set up your network
security.
Checklist
A checklist has been provided towards the end of each procedure (Step 16). This checklist is
included in the setup so that you can record all the pertinent information required for the connection
between your PC and the ProxyServer. Keep this as a reference for future upgrades.