KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
33
3.2 Safety measures during depreservation, installation, test operation and running-in
During washing of the tractor, application and removal
of lubricants, paintwork coatings, the workers shall be
provided with aprons, gantlets and protective goggles.
Perform preparation of the tractor for operation only with the
engine being shut off and the parking brake being pulled up;
the mounted implements shall be lowered.
IT IS PROHIBITED
to be under the
tractor as well as in the area under the
hinge pivot device of the frame with the
engine being in operation.
During depreservation, installation, assembly, test operation and running-in follow the guidelines
set forth in the corresponding sections.
Perform depreservation and preservation of the tractor in a specially equipped room with
observance of all occupational and industrial safety regulations and fire safety regulations.
3.3 Safety measures during tractor operation
Before starting the engine, the change-gear lever and thechange-mode level shall be in the
“Neutral N” position (Fig.5); the levers of hydraulic distributor of the mounted implement shall be
in the “Neutral” position; the parking brake shall be pulled up.
Before taking off make sure that the road is free, that there are no people between the tractor
and the agricultural implements as well as in the area of frame hinge pivot device. Issue a
warning sound signal at the beginning of movement.
Before exiting from the tractor set the change-gear lever and thechange-mode level into the
“Neutral N” position; the levers of hydraulic distributor of the mounted implement – into the
“Neutral” position; pull up the parking brake and shut off the engine.
In order to avoid overheating of the hydraulic system, do not leave the tractor in the position of
full swing (up to the stop) of the semi-frames to the right or to the left.