KIROVETS K-744R1, K-744R2, K-744R3, K-744R4 tractors
118
Job content
M-1 (125
engine
hours)
M-2 (500
engine
hours)
M-3 (1000
engine
hours)
Note
Wash up the following:
– filter of centrifugal cleaning of
engine oil;
– transmission gearbox filter;
– breathers of driving axles and
single speed PTO, PDR
Check the level and, if necessary,
refill:
– oil to the engine lubrication
system;
– oil to the tank of hydraulic
systems of mounted implement and
steering control;
– oil to the gearbox hydraulic
system;
– oil to the cases of main and final
gears of driving axles;
– cooling fluid to the standby tank
Replace oil:
– in engine lubrication system;
In accordance with the engine operating instruction
– in hydraulic system of the
mounted implement and steering
control;
Execute the operation every
other M-3
– in transmission gearbox hydraulic
system
– in main and final drive casing of
the drive axle system
Execute the operation every
other M-3 session
Replace:
– filtering elements and wash up
hydraulic tank filter housings
Execute the operation every
other M-1 session (250 engine
hours)
– filtering element and wash up the
filter housing, oil filter of the engine
In accordance with the engine operating instruction
– filtering elements of pressure
filters of the hydraulic system and
wash up the filter housings
When the filtering element
clogging indicator lamp is alight
at the working fluid temperature
above 20°С
– oil filter of the engine
In accordance with the engine operating instruction
– coarse mesh fuel filter
– fine mesh fuel filter
In accordance with the engine operating instruction
Drain the following:
– condensate from the air cylinders
0.1 l of fuel each from coarse mesh
fuel filter and fine mesh filter
Check the following and adjust, if
required:
– drive belt tension
– drain pedal drive